Cammporfile Gaskets Flexcamm
FMI Flexcamm® cammprofile gaskets are recognized as a new high quality sealing alternative. These gaskets are used as problem solver when there is a difficult sealing environment and performance are critical at low seating stresses. Flexcamm® gaskets consist of a metal core with concentric grooves with sealing layers made of flexible graphite Flexigraf®, expanded mica Micatherm, conventional ptfe or bidirectional ptfe Sichem®. Metal core is usually selected based on metallurgy of the piping. Flexcamm® are manufactured in different materials and non-circular shapes with extreme accuracy. They can also be custom engineered to fit various applications.
STYLE FN
Manufactured without a guide ring for tongue and groove, or recessed flange applications such as male and female. It is typically used in heat exchanger applications and applied as an upgrade to double jacketed gaskets.
STYLE FG
Constructed with an integral guide ring for aligning purposes. It is suggested to be used in raised face flanges. The gasket is typically designed and sized per EN12560-6 spec for ASME B16.5 flanges, but can be manufactured to fit other standards.
STYLE FA
Constructed with a lose guide ring. This solution is recommended in application with excessive radial shear characteristics, thermal cycling, and expansions. The gasket is typically designed and sized per EN12560-6 spec for ASME B16.5 flanges, but can be manufactured to fit other standards.
SRG GASKET
(solid reinforced graphite)
SRG gasket is a solid gasket made by a rigid metal core with two expanded graphite layers bonded to each face. Solid core provide protection against blow out whilst soft graphite layers provide an excellent seal due its high conformability into the flange faces even under low applied seating stesses. It is possible to use a wide range of core materials, from carbon steel to exotic alloys. SRG gasket finds applications in chemical and petrolchemical plants for Low pressure heat exchangers, narrow land width, non circular shapes.
