KLINGERSIL® C-4243

Universal gasket material for general industrial applications.

Suitable as a gasket material for water, oils, hydrocarbons, liquids and gases at lower pressure and temperatures.

Compressibility ASTM F 36 J: 8%
Recovery ASTM F 36 J min.: 55%
Stress relaxation DIN 52913, 50 MPa, 16 h/175°C: 24MPa

thickness decrease at 23°C: 10%
thickness decrease at 200°C: 25%
Tightness according to DIN 3535/6: < 0,1 mg/s x m

oil JRM 903: 5 h/150°C: 5%
fuel B: 5 h/20°C: 7%
Density: 1,75g/cm3

For international approvals and certification on all materials please contact Khong Lieng. Certain grades are available with wire or expanded metal reinforcement.

Dimensions of the standard sheets
Sizes: 1000 x 1500 mm, 2000 x 1500 mm.
Thicknesses: 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm; other thicknesses and sizes on request.
Tolerances: thickness ±10%, length ± 50 mm, width ± 50 mm

Surfaces
KLINGERSIL® gasket materials are generally furnished with surfaces of low adhesion. On request, graphite facings and other surface finishes on one or both sides are also available.

Function and durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.